We – EPG Group the biggest agricultural gearbox and pto factory in China with 5 diverse branches. For far more information: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
Near up of two yokes with the universal joint. Be aware the slight oozing of grease from the UJ seal finishes, the clump of grease is from inside the yoke splined shaft region –Push (outer) yoke has a female (normal spline) gap and “Y” form finish that is the common joint (UJ) mount. –UJ is a cross shaped casting getting roller bearings enclosed with caps at all four factors and is held into the yoke with 4 “C” clips –Internal yoke and drive shaft is another yoke welded to the drive end, of the travel shaft. –Pushed shaft and internal yoke is the driven shaft that rides inside of of the travel shaft and has a yoke welded at the pushed conclude –UJ another UJ as previously mentioned Our patented coupling mechanism C Line is the consequence of our expertise and growth. It allows easy coupling and uncoupling of the PTO push shaft. The protect delivers the person far more ease and comfort simply because of its ergonomically and compact form. The users’ protection is assured, due to the fact he simply cannot get entangled in protruding components of the yoke. There is also much less dirt current at dealing with and there are much less difficulties related with it. pto shaft overlap EPG rzr xp a thousand rear prop shaft is john deere mx10 pto shaft willing 1996 ford ranger drive shaft to audi a6 generate shaft cooperate pto shaft hsn code sincerely ford tractor pto shaft measurement and j and r driveshafts develop pto shaft for publish gap digger commonly pto shafts at fleet farm with friends! EPG specializing in the manufacture of rotocultivator ploughshares and other non-standardized farm equipment chopping instruments.
LM plum Blossom Elastic shaft coupling(GB/T5272-2002)
Plum elastic coupling has the attributes of vibration reduction, buffering, tiny radial dimensions, no lubrication and simple maintenance. Ideal for commencing frequency, optimistic and unfavorable rotation, medium and reduced pace, medium and modest power transmission.Not suited for heavy hundreds and regular replacement of elastic factors.
The composition of plum elastic coupling is straightforward.But when the elastic factor is changed, the 50 % coupling shall be moved axially.LMS type is straightforward to substitute the elastic element without having getting to transfer the 50 % coupling.
Fundamental Parameter And Primary Dimension(GB/T5014-2003)
| Kind | Nominal torque(Tn/N·m) | Velocity(Np) | Shaft hole diameter (done,dtwo,dz) |
Size of shaft gap | LO | D | D1 | Kind of elastic elements | Mass | Rotary inertia | ||||||||||||||
| Hardness of elastic parts | LM | LMD,LMS | Y kind | J1,Z variety | L (advise) |
LM | LMD | LMS | LMD,LMS | LM | LMD | LMS | LM | LMD | LMS | |||||||||
| a/HA | b/High definition | L | ||||||||||||||||||||||
| eighty+5 | sixty+five | r·min-1 | Mm | kg | kg·mtwo | |||||||||||||||||||
| LM1 LMD1 LMS1 |
twenty five | 45 | 15300 | 8500 | 12,fourteen | 32 | 27 | 35 | 86 | ninety two | ninety eight | 50 | 90 | MT1-a -b | .sixty six | 1.21 | one.33 | .0002 | .0008 | .0013 | ||||
| 16,18,19 | 42 | thirty | ||||||||||||||||||||||
| twenty,22,24 | fifty two | 38 | ||||||||||||||||||||||
| twenty five | 62 | forty four | ||||||||||||||||||||||
| LM2 LMD2 LMS2 |
fifty | a hundred | 1200 | 7600 | sixteen,18,19 | 42 | thirty | 38 | 95 | one zero one.5 | 108 | sixty | one hundred | MT2-a -b | .93 | 1.sixty five | 1.seventy four | .0004 | .0014 | .0021 | ||||
| 20,22,24 | fifty two | 38 | ||||||||||||||||||||||
| twenty five,28 | sixty two | forty four | ||||||||||||||||||||||
| thirty | 82 | sixty | ||||||||||||||||||||||
| LM3 LMD3 LMS3 |
one hundred | two hundred | 10900 |
6900 | 20,22,24 | 52 | 38 | forty | 103 | a hundred and ten | 117 | 70 | a hundred and ten | MT3-a -b | 1.forty one | two.36 | 2.33 | .0009 | .0024 | .0034 | ||||
| twenty five,28 | sixty two | 44 | ||||||||||||||||||||||
| thirty,32 | eighty two | sixty | ||||||||||||||||||||||
| LM4 LMD4 LMS4 |
140 | 280 | 9000 |
6200 | 22,24 | fifty two | 38 | forty five | 114 | 122 | a hundred thirty | eighty five | a hundred twenty five | MT4-a -b | two.18 | three.56 | three.38 | .002 | .005 | .0064 | ||||
| 25,28 | sixty two | forty four | ||||||||||||||||||||||
| thirty,32,35,38 | 82 | 60 | ||||||||||||||||||||||
| 40 | 112 | 84 | ||||||||||||||||||||||
| LM5 LMD5 LMS5 |
350 | four hundred | 7300 |
5000 | 25,28 | sixty two | forty four | 50 | 127 | 138.five | one hundred fifty | a hundred and five | a hundred and fifty | MT5-a -b | three.60 | six.36 | 6.07 | .005 | .0135 | .0175 | ||||
| 30,32,35,38 | 82 | sixty | ||||||||||||||||||||||
| 40,42,45 | 112 | 84 | ||||||||||||||||||||||
| LM6 LMD6 LMS6 |
four hundred | 710 | 6100 |
4100 | thirty,32,35,38 | eighty two | 60 | fifty five | 143 | 155 | 167 | 185 | 185 | MT6-a -b | 6.07 | 10.77 | ten.47 | .0114 | .0329 | .0444 | ||||
| 40,forty two,forty five,48 | 112 | eighty four | ||||||||||||||||||||||
| LM7 LMD7 LMS7 |
630 | 1120 | 5300 | 3700 | 35*,38* | eighty two | 60 | 60 | 159 | 172 | 185 | 205 | 205 | MT7-a -b | 9.09 | 15.thirty | fourteen.22 | .0232 | .0581 | .0739 | ||||
| forty*,42*,forty five,48,fifty,55 | 112 | 84 | ||||||||||||||||||||||
| LM8 LMD8 LMS8 |
1120 | 2240 | 4500 | 3100 | forty five*,48*,50,55,56 | 112 | eighty four | 70 | 181 | 195 | 209 | a hundred and seventy | 240 | MT8-a -b | 13.fifty six | 22.seventy two | 21.sixteen | .0468 | .1175 | .1493 | ||||
| sixty,63,65 | 142 | 107 | ||||||||||||||||||||||
| LM9 LMD9 LMS9 |
1800 | 3550 | 3800 | 2800 | 50*,55*,56* | 112 | 84 | 80 | 208 | 224 | 240 | two hundred | 270 | MT9-a -b | 21.forty | 34.forty four | thirty.70 | .1041 | .2333 | .2767 | ||||
| sixty,sixty three,65,70,seventy one,75 | 142 | 107 | ||||||||||||||||||||||
| 80 | 172 | 132 | ||||||||||||||||||||||
| LM10 LMD10 LMS10 |
2800 | 5600 | 3300 | 2500 | 60*,sixty three*,sixty five*,70,seventy one,75 | 142 | 107 | ninety | 230 | 248 | 268 | 230 | 305 | MT10-a -b | 32.03 | 51.36 | 44.fifty five | .2105 | .4594 | .5262 | ||||
| eighty,85,ninety,ninety five | 172 | 132 | ||||||||||||||||||||||
| one hundred | 212 | 167 | ||||||||||||||||||||||
| LM11 LMD11 LMS11 |
4500 | 9000 | 2900 | 2200 | seventy one*,seventy one*,seventy five* | 142 | 107 | a hundred | 260 | 284 | 308 | 260 | 350 | MT11-a -b | 49.52 | 81.thirty | 70.seventy two | .4338 | .9777 | one.1362 | ||||
| 80*,85*,ninety,ninety five | 172 | 132 | ||||||||||||||||||||||
| one hundred,110,a hundred and twenty | 212 | 167 | ||||||||||||||||||||||
| LM12 LMD12 LMS12 |
6300 | 12500 | 2500 | 1900 | eighty*,85*,ninety*ninety five | 172 | 132 | 115 | 297 | 321 | 345 | three hundred | four hundred | MT12-a -b | 73.forty five | a hundred and fifteen.fifty three | 99.fifty four | .8205 | one.751 | 1.9998 | ||||
| 100,one hundred ten,120,one hundred twenty five | 212 | 167 | ||||||||||||||||||||||
| one hundred thirty,one hundred forty,one hundred fifty | 252 | 202 | ||||||||||||||||||||||
| LM13 LMD13 LMS13 |
11200 | 2000 | 2100 | 1600 | ninety*,95* | 172 | 132 | 125 | 323 | 348 | 373 | 360 | 460 | MT13-a -b | 103.86 | 161.79 | 137.53 | 1.6718 | three.667 | 3.6719 | ||||
| a hundred*,one hundred ten*,120*,125* | 212 | 167 | ||||||||||||||||||||||
| one hundred thirty,one hundred forty,a hundred and fifty | 252 | 202 | ||||||||||||||||||||||
| LM14 LMD14 LMS14 |
12500 | 25000 | 1900 | 1500 | a hundred*,110*,one hundred twenty*,a hundred twenty five* | 212 | 167 | a hundred thirty five | 333 | 358 | 383 | four hundred | 500 | MT14-a -b | 127.fifty nine | 196.32 | a hundred sixty five.25 | two.499 | 4.8669 | five.1581 | ||||
| one hundred thirty*,140*,a hundred and fifty | 252 | 202 | ||||||||||||||||||||||
| a hundred and sixty | 302 | 242 | ||||||||||||||||||||||
Notice:
one.Mass and rotary inertia are the approximation calculated according to the advised minimum axial hole.
two.Diameter of shaft hole with* can be utilised for Z type shaft gap.
3.a.b is the code for two various supplies and hardness of elastic areas.
Merchandise Display
♦Other Products Record
| Transmission Machinery Parts Name |
Product |
| Universal Coupling | WS,WSD,WSP |
| Cardan Shaft | SWC,SWP,SWZ |
| Tooth Coupling | CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
| Disc Coupling | JMI,JMIJ,JMII,JMIIJ |
| High Adaptable Coupling | LM |
| Chain Coupling | GL |
| Jaw Coupling | LT |
| Grid Coupling | JS |
♦Our Organization
Our business materials distinct sorts of merchandise. Higher quality and realistic value. We adhere to the basic principle of “good quality initial, provider initial, constant enhancement and innovation to satisfy the buyers” for the administration and “zero defect, zero problems” as the quality objective. To best our service, we give the products with good good quality at the realistic value.
Welcome to customize products from our factory and please offer your design drawings or contact us if you require other requirements.
♦Our Solutions
one.Design and style Providers
Our layout staff has experience in cardan shaft relating to merchandise design and style and development. If you have any needs for your new solution or would like to make even more improvements, we are right here to provide our support.
2.Merchandise Companies
uncooked supplies → Reducing → Forging →Rough machining →Shot blasting →Heat treatment method →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
3.Samples Procedure
We could develop the sample according to your prerequisite and amend the sample continuously to satisfy your want.
4.Study & Development
We generally research the new wants of the marketplace and create the new product when there is new automobiles in the industry.
five.Top quality Management
Every single step should be particular check by Specialist Workers according to the standard of ISO9001 and TS16949.
♦FAQ
Q 1: Are you trading company or manufacturer?
A: We are a skilled producer specializing in producing
numerous collection of couplings.
Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with custom-made artworks of PDF or AI structure.
Q 3:How long is your shipping and delivery time?
Generally it is 20-thirty days if the goods are not in inventory. It is according to quantity.
Q 4: Do you supply samples ? Is it free or extra ?
Sure, we could supply the sample but not for free of charge.In fact we have a extremely good cost basic principle, when you make the bulk get then cost of sample will be deducted.
Q 5: How prolonged is your guarantee?
A: Our Guarantee is 12 thirty day period below regular circumstance.
Q 6: What is the MOQ?
A:Normally our MOQ is 1pcs.
Q 7: Do you have inspection techniques for coupling ?
A:a hundred% self-inspection prior to packing.
Q 8: Can I have a pay a visit to to your factory ahead of the buy?
A: Positive,welcome to check out our factory.
Q 9: What’s your payment?
A:one) T/T. two) L/C
♦Contact Us
Web:
Add: No.1 Fuyang Road,Chengnan park,Jingjiang City,Jiangsu Province,China
The use of unique gear manufacturer’s (OEM) part figures or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our organization and the detailed alternative areas contained herein are not sponsored, accepted, or manufactured by the OEM.
